From: Active participation of industrial enterprises in electricity markets - a generic modeling approach
CAS components and input parameters | EMC constraints | |
---|---|---|
Compressor | Identifier | ∙ Operational pressure shall remain in the given tolerance. |
 | Electrical power rating (kW) |  |
 | Maximum air supply (m3/unit time) |  |
 | Control type : Binary or Continuous |  |
 | Minimum run time (MR) | ∙ Input air supply shall be under the maximum capacity of the compressors |
 | Minimum off time (MO) |  |
 | No. of switches allowed (Ns) |  |
Storage tank | Identifier | Â |
 | Initial pressure (bar) | ∙ If a compressor is of type binary control, then dwell time constraints (MO, MR, and Ns) shall be respected throughout the optimization horizon |
 | Capacity (m3) |  |
 | Set pressure (bar) |  |
 | Maximum pressure (bar) |  |
 | Minimum pressure (bar) |  |